Kristian Muri Knausgård

• Olsen, Ørjan Langøy; Sørdalen, Tonje Knutsen; Goodwin, Morten; Malde, Ketil; Knausgård, Kristian Muri & Halvorsen, Kim Aleksander Tallaksen (2023). A contrastive learning approach for individual re-identification in a wild fish population. Proceedings of the Northern Lights Deep Learning Workshop. 4. doi: 10.7557/18.6824. Fulltekst i vitenarkiv Vis sammendrag

  In both terrestrial and marine ecology, physical tagging is a frequently used method to study population dynamics and behavior. However, such tagging techniques are increasingly being replaced by individual re-identification using image analysis. This paper introduces a contrastive learning-based model for identifying individuals. The model uses the first parts of the Inception v3 network, supported by a projection head, and we use contrastive learning to find similar or dissimilar image pairs from a collection of uniform photographs. We apply this technique for corkwing wrasse, Symphodus melops, an ecologically and commercially important fish species. Photos are taken during repeated catches of the same individuals from a wild population, where the intervals between individual sightings might range from a few days to several years. Our model achieves a one-shot accuracy of 0.35, a 5-shot accuracy of 0.56, and a 100-shot accuracy of 0.88, on our dataset.

• Holen, Martin; Ruud, Else-Line Malene; Warakagoda, Narada Dilp; Granmo, Ole-Christoffer; Engelstad, Paal E. & Knausgård, Kristian Muri (2022). Towards Using Reinforcement Learning for Autonomous Docking of Unmanned Surface Vehicles. I Iliadis, Lazaros; Jayne, Chrisina; Tefas, Anastasios & Pimenidis, Elias (Red.), Engineering Applications of Neural Networks. EANN 2022. Communications in Computer and Information Science. Springer Nature. ISSN 978-3-031-08223-8. s. 461–474. doi: 10.1007/978-3-031-08223-8_38. Fulltekst i vitenarkiv Vis sammendrag

  Providing full autonomy to Unmanned Surface Vehicles (USV) is a challenging goal to achieve. Autonomous docking is a subtask that is particularly difficult. The vessel has to distinguish between obstacles and the dock, and the obstacles can be either static or moving. This paper developed a simulator using Reinforcement Learning (RL) to approach the problem. We studied several scenarios for the task of docking a USV in a simulator environment. The scenarios were defined with different sensor inputs and start-stop procedures but a simple shared reward function. The results show that the system solved the task when the IMU (Inertial Measurement Unit) and GNSS (Global Navigation Satellite System) sensors were used to estimate the state, despite the simplicity of the reward function.

• Gupta, Aditya; Bringsdal, Even; Knausgård, Kristian Muri & Goodwin, Morten (2022). Accurate Wound and Lice Detection in Atlantic Salmon Fish Using a Convolutional Neural Network. Fishes. ISSN 2410-3888. 7(6). doi: 10.3390/fishes7060345. Fulltekst i vitenarkiv
• Gupta, Aditya; Bringsdal, Even; Salbuvik, Nicole; Knausgård, Kristian Muri & Goodwin, Morten (2022). An Accurate Convolutional Neural Networks Approach to Wound Detection for Farmed Salmon. I Iliadis, Lazaros; Jayne, Chrisina; Tefas, Anastasios & Pimenidis, Elias (Red.), Engineering Applications of Neural Networks - 23rd International Conference, EAAAI/EANN 2022. Springer Nature. ISSN 978-3-031-08222-1. s. 139–149. doi: 10.1007/978-3-031-082. Vis sammendrag

  Fish is one of the most important food sources worldwide and for people in Nordic countries. For this reason, fish has been widely cultivated, but aquacultural fish are severely affected by lice, maturity, wounds, and other harmful factors typically part of agricultural fish, resulting in millions of fish deaths. Unfortunately, diagnosing injuries and wounds in live salmon fish is difficult. However, this study uses image-based machine learning approaches to present a wound detection technique for live farmed salmon fish. As part of this study, we present a new dataset of 3571 photos of injured and non-wounded fish from the Institute of Marine Research’s genuine fish tank. We also propose a Convolutional Neural Network tailored for such wound detection with 20 convolutional and five subsequent dense layers. The model incorporates methods such as dropout, early halting, and Gaussian noise to avoid overfitting. Compared to the established VGG-16 and VGG-19 models, the proposed approaches have a validation accuracy of 96.22%. The model has low 0.0199 and 0.941 false positive and true positive rates, making it a good candidate for accurate live production

• Holen, Martin; Knausgård, Kristian Muri & Goodwin, Morten (2022). Development of a Simulator for Prototyping Reinforcement Learning-Based Autonomous Cars. Informatics. ISSN 2227-9709. 9(2). doi: 10.3390/informatics9020033. Fulltekst i vitenarkiv Vis sammendrag

  Autonomous driving is a research field that has received attention in recent years, with increasing applications of reinforcement learning (RL) algorithms. It is impractical to train an autonomous vehicle thoroughly in the physical space, i.e., the so-called ’real world’; therefore, simulators are used in almost all training of autonomous driving algorithms. There are numerous autonomous driving simulators, very few of which are specifically targeted at RL. RL-based cars are challenging due to the variety of reward functions available. There is a lack of simulators addressing many central RL research tasks within autonomous driving, such as scene understanding, localization and mapping, planning and driving policies, and control, which have diverse requirements and goals. It is, therefore, challenging to prototype new RL projects with different simulators, especially when there is a need to examine several reward functions at once. This paper introduces a modified simulator based on the Udacity simulator, made for autonomous cars using RL. It creates reward functions, along with sensors to create a baseline implementation for RL-based vehicles. The modified simulator also resets the vehicle when it gets stuck or is in a non-terminating loop, making it more reliable. Overall, the paper seeks to make the prototyping of new systems simple, with the testing of different RL-based systems.

• Holen, Martin; Knausgård, Kristian Muri & Goodwin, Morten (2022). An Evaluation of Autonomous Car Simulators and Their Applicability for Supervised and Reinforcement Learning. I Sanfilippo, Filippo; Granmo, Ole-Christoffer; Yildirim Yayilgan, Sule & Bajwa, Imran Sarwar (Red.), Intelligent Technologies and Applications: 4th International Conference, INTAP 2021, Grimstad, Norway, October 11–13, 2021, Revised Selected Papers. Springer. ISSN 978-3-031-10524-1. s. 367–379. doi: 10.1007/978-3-031-10525-8_29. Vis sammendrag

  Recent advancements in the field of Machine Learning have sprouted a renewed interest in the area of autonomous cars. Companies use different techniques to develop autonomous cars, including buying several vehicles to develop Advanced Driver Assistance Systems (ADAS), while others use car simulators. Simulators for autonomous cars include a wide variety of different sensors. Some simulators come free or even open-source, while others require to pay for the simulator itself, server time, or each sensor. The quality and focus of each of these vary, with some having LIDAR scanned roads for highly realistic roads, while others have entirely natural and realistic vehicle dynamics.

• Knausgård, Kristian Muri; Skar, Siv; Sanfilippo, Filippo; Buldenko, Albert; Lindheim, Henning & Lunde, Jakob E. [Vis alle 8 forfattere av denne artikkelen] (2022). Branch-Manoeuvring Capable Pipe Cleaning Robot for Aquaponic Systems. I Sanfilippo, Filippo; Granmo, Ole-Christoffer; Yildirim Yayilgan, Sule & Bajwa, Imran Sarwar (Red.), Intelligent Technologies and Applications: 4th International Conference, INTAP 2021, Grimstad, Norway, October 11–13, 2021, Revised Selected Papers. Springer. ISSN 978-3-031-10524-1. s. 107–118. doi: 10.1007/978-3-031-10525-8_9. Vis sammendrag

  Aquaponic systems are engineered ecosystems combining aquaculture and plant production. Nutrient rich water is continuously circulating through the system from aquaculture tanks. A biofilter with nitrifying bacteria breaks down fish metabolism ammonia into nitrite and nitrate, which plants and makes the aquaculture wastewater into valued organic fertiliser for the plants, containing essential macro and micro elements. At the same time, the plants are cleaning the water by absorbing ammonia from the fish tanks before it reaches dangerous levels for the aquatic animals. In principle, the only external input is energy, mainly in the form of light and heat, but fish food is also commonly provided. Growing fish food is potentially feasible in a closed loop system, hence aquaponic systems can possibly be an important source of proteins and other important nutrition when, for example, colonising other planets in the future. Fully autonomous aquaponic systems are currently not available. This work aims at minimising manual labour related to cleaning pipes for water transport. The cleaning process must be friendly to both plants and aquatic animals. Hence, in this work, pure mechanical cleaning is adopted. A novel belt-driven continuum robot capable of travelling through small/medium diameter pipes and manoeuvring branches and bends, is designed and tested. The robot is modular and can be extended with different cleaning modules through an interface providing CAN-bus network and electric power. The flexible continuum modules of the robot are characterised. Experimental results demonstrate that the robot is able to travel through pipes with diameters varying from 50 mm to 75 mm, and also capable of handling T-branches of up to 90∘.

• Goodwin, Morten; Halvorsen, Kim Aleksander Tallaksen; Jiao, Lei; Knausgård, Kristian Muri; Martin, Angela Helen & Moyano, Marta [Vis alle 10 forfattere av denne artikkelen] (2022). Unlocking the potential of deep learning for marine ecology: overview, applications, and outlook. ICES Journal of Marine Science. ISSN 1054-3139. 79(2), s. 319–336. doi: 10.1093/icesjms/fsab255. Fulltekst i vitenarkiv Vis sammendrag

  The deep learning (DL) revolution is touching all scientific disciplines and corners of our lives as a means of harnessing the power of big data. Marine ecology is no exception. New methods provide analysis of data from sensors, cameras, and acoustic recorders, even in real time, in ways that are reproducible and rapid. Off-the-shelf algorithms find, count, and classify species from digital images or video and detect cryptic patterns in noisy data. These endeavours require collaboration across ecological and data science disciplines, which can be challenging to initiate. To promote the use of DL towards ecosystem-based management of the sea, this paper aims to bridge the gap between marine ecologists and computer scientists. We provide insight into popular DL approaches for ecological data analysis, focusing on supervised learning techniques with deep neural networks, and illustrate challenges and opportunities through established and emerging applications of DL to marine ecology. We present case studies on plankton, fish, marine mammals, pollution, and nutrient cycling that involve object detection, classification, tracking, and segmentation of visualized data. We conclude with a broad outlook of the field’s opportunities and challenges, including potential technological advances and issues with managing complex data sets.

• Knausgård, Kristian Muri; Wiklund, Arne; Sørdalen, Tonje Knutsen; Halvorsen, Kim Tallaksen; Kleiven, Alf Ring & Lei, Jiao [Vis alle 7 forfattere av denne artikkelen] (2021). Temperate fish detection and classification: a deep learning based approach. Applied intelligence (Boston). ISSN 0924-669X. doi: 10.1007/s10489-020-02154-9. Fulltekst i vitenarkiv
• Olsvik, Erlend; Trinh, Christian M.D.; Knausgård, Kristian Muri; Wiklund, Arne; Sørdalen, Tonje Knutsen & Kleiven, Alf Ring [Vis alle 8 forfattere av denne artikkelen] (2019). Biometric fish classification of temperate species using convolutional neural network with squeeze-and-excitation. Lecture Notes in Computer Science (LNCS). ISSN 0302-9743. 11606 LNAI, s. 89–101. doi: 10.1007/978-3-030-22999-3_9. Fulltekst i vitenarkiv

Se alle arbeider i Cristin

• Knausgård, Kristian Muri; Skar, Siv; Sanfilippo, Filippo; Buldenko, Albert; Lindheim, Henning & Lunde, Jakob [Vis alle 8 forfattere av denne artikkelen] (2021). Branch-Manoeuvring Capable Pipe Cleaning Robot for Aquaponic Systems. Vis sammendrag

  Aquaponic systems are engineered ecosystems combining aquaculture and plant production. Nutrient rich water is continuously circulating through the system from aquaculture tanks. A biofilter with nitrifying bacteria breaks down fish metabolism ammonia into nitrite and nitrate, which plants and makes the aquaculture wastewater into valued organic fertiliser for the plants, contenting essential macro and micro elements. At the same time, plants are cleaning the water by absorbing ammonia from the fish tanks before it reaches dangerous levels for the aquatic animals. In principle, the only external input is energy, mainly in the form of light and heat, but fish food is also commonly provided. Growing fish food is potentially feasible in a closed loop system, hence aquaponic systems can possibly be an important source of proteins and other important nutrition when, for example, colonising other planets in the future. Fully autonomous aquaponic systems are currently not available. This work aims at minimising manual labour related to cleaning pipes for water transport. The cleaning process must be friendly to both plants and aquatic animals. Hence, in this work, pure mechanical cleaning is adopted. A novel belt-driven continuum robot capable of travelling through small/medium diameter pipes and manoeuvring branches and bends, is designed and tested. The robot is modular and can be extended with different cleaning modules through an interface providing CAN-bus network and electric power. The flexible continuum modules of the robot are characterised. Experimental results demonstrate that the robot is able to travel through pipes of diameter 50 mm to 75 mm, and also capable of handling T-branches of up to 90 degrees.

• Sanfilippo, Filippo; Thorstensen, Rein Terje; Jha, Ajit; Jiang, Zhiyu; Knausgård, Kristian Muri & Robbersmyr, Kjell Gunnar (2021). A Perspective of Road Infrastructure and Bridges Digital Twins.
• Knausgård, Kristian Muri & Ottestad, Morten (2018). Mobile autonome roboter i et utdanningsperspektiv.
• Robbersmyr, Kjell Gunnar & Knausgård, Kristian Muri (2018). Studentprosjekter 2018.
• Robbersmyr, Kjell Gunnar; Choux, Martin Marie Hubert; Zhou, Jing & Knausgård, Kristian Muri (2018). Mekatronikk.
• Robbersmyr, Kjell Gunnar & Knausgård, Kristian Muri (2018). Mekatronikk.
• Knausgård, Kristian Muri & Robbersmyr, Kjell Gunnar (2018). Studentprosjekter - innhenting og valg. Universitetet i Agder.
• Esnault, Michel; Knausgård, Kristian Muri & Robbersmyr, Kjell Gunnar (2017). Innovation Gateway – Behovskartlegging og struktur. Universitetet i Agder.

Se alle arbeider i Cristin